The Nortel M7310 phone offers excellent features and is a popular choice for different office environments. You may know how to execute different calling functions and features, but do you know how to change the time on your Nortel M7310 phone? Don’t worry – we will go over to simple steps.

There are actually three methods in which you can complete the task, depending on your phone. For your convenience, we will go over all three.

Method 1

To begin Method 1, press the FEATURE key (this button may look like a globe with a ring around it). You should see “Feature: ” displayed on your LCD screen. Next, press * * 8 4 6 3 – If “Invalid Feature Code” or another error message appears on your LCD screen, you will need to use Method 2 for programming.

If your display screen reads “Password: ” you may continue and press 2 2 7 4 2. If “RETRY” is displayed on the screen, press 2 3 6 4 6.

When your display screen reads “Hour:01”, you may press the CHANGE softkey button (located below the screen). Using the keypad, enter the hour using two digits. For example, 2pm would be 02.

The screen should change and show AM. Press OK for AM, or press the CHANGE softkey and then press OK for PM.

Press the NEXT softkey below the screen. “Minutes:00” should be displayed. Press the CHANGE softkey then enter the minutes using the keypad.

After entering the minutes, you may press the RLS button (looks like a telephone handset with an arrow pointing down). “End of Session” will appear on the LCD screen and you will have successfully changed the time on your Nortel M7310 phone.

 Method 2

For Method 2 and 3, you will need to log into system programming.

Press the FEATURE key, then enter * * 2 6 6 3 4 4 – If your display screen reads “Invalid Feature Code” or another error message appears, you will need to use Method 3 for programming.

If your display reads “Password: ”, you may enter 2 3 6 4 6.

NOTE:  You have now entered Programming mode. The buttons on your phone will temporarily change their functions. Once you exit programming mode, normal functions will be restored.

For your M7310, the functions of the 4 memory or line buttons below the LCD display (2 on the left and 2 on the right) will change. From top to bottom, the left side buttons will be the Heading and then Back button. The right side buttons from top to bottom will be the Show and then Next Button.

Using these buttons, press NEXT until you see “Time & Date” on the display. Press the SHOW button to see the current hour displayed. Press the CHANGE softkey to change the hour, then the NEXT softkey to change the minutes. Input changes accordingly. To save your changes, press the NEXT button. Press the RLS button to complete the process and exit programming mode.

Method 3

Press the FEATURE button, followed by * * 2 6 6 3 4 4. Then enter password 2 6 6 3 4 4. The display should read “A.Configuration”.

As stated previously, you have entered Programming Mode and said buttons have temporarily changed their functions. Normal functions will be restored upon exiting Programming Mode.

Using the programming mode buttons, press NEXT. The display will read “B.General Admin”. Press SHOW to display “1.Sys Speed Dial” on the screen, and then press NEXT two times to display the third option “3.Time and date”. Press SHOW and your current time setting will be displayed in the standard four digit format – “Time # # : # #”.

The change the time, press the CHANGE softkey and the display will read “Hour: ”. Press the CHANGE softkey again for the display to read “Hour:_”. You may then enter the new HOUR in 24hour format. For example, 5pm will be 17:00. The display will then tell you that the new hour is programmed.

Press NEXT and the display will read “Minutes: # #”. Press the CHANGE softkey and the display will read “Minutes:_”. You may then enter the new MINUTES using the keypad. The display will then tell you that the new minutes are programmed. Complete the process and exit programming mode by pressing the RLS button.

Use the appropriate method for your situation and you will have successfully changed the time on your Nortel M7310 phone. Be sure to subscribe to our YouTube channel so you don’t miss our new video tutorials.

If you have any questions regarding these steps, please do not hesitate to contact us at 1-800-564-8045, or visit us online. You can connect with us on Facebook, Google+, Twitter, and Pinterest, too!

 

 

Tags: nortel m7310, nortel m7310 manual, nortel m7310 phone, nortel norstar m7310